Benchtop X-Y Mortising Machine 34-260 gives precision positioning of your work for boring mortises because of the sliding, X-Y axis table. Front controls move the table either forward-and-back, or side-to-side along the dual dovetail ways. The front clamp pushes work against the cast iron rear fence, as well as acting as a hold down.
- 1/2 HP 120 Volt TEFC Motor
- Dovetail Column Ways with Adjustable Stop
- Gas Filled Stabilizer
- Includes 2 Extensions
- 5/8″ & 3/4″ Chisel Bushings
- INCLUDES: Fence, Hold Down, Tool Holder and 4 Chisels
SPECIFICATIONS
| Motor Horsepower | 1/2 HP TEFC |
| Motor Amps | 3.6 |
| Motor Volts | 120V, 60Hz |
| Motor RPM | 1,700 |
| Type | Benchtop |
| Chisel Shank Diameter | 1”(with 5/8“ & 3/4” Bushings) |
| Chisel Stroke | 4-3/4” |
| Chisel Range | 1/4“ – 5/8” |
| Chisel Sizes Included | 1/4”, 5/16”, 3/8”, 1/2” |
| Hold Down Length From Fence | – |
| Maximum Hold Down Stock Height* | 4-11/16″ |
| Roller Clamps Diameter (2) | – |
| Maximum Stock Width | 3-7/8″ |
| Chuck Type | Keyed |
| Chuck Capacity | 1/2” |
| Table Size | 7” x 5-1/8” |
| Side Extension Size (2) | – |
| Table Width With Extensions | – |
| Table Movement Side-to-Side | 6-1/2” |
| Table Movement Front-to-Back | 3-7/8” |
| Fence Size | 2” x 7” |
| Overall Height | 32-1/2” |
| Overall Width | 21-3/4” |
| Overall Depth | 22-1/2” |
| Overall Base Size | 10-3/4” x 12-1/2” |
| Overall Net Weight | 86 lbs. |
| Warranty | 5 Years |
Operators‘ Manual